After the LAN Settings are complete, the Site Configuration > LAN Clients tab will show a list of all connected/previously connected clients that have connected to the LAN.
The client name, connection status, connection type, SSID (if using Edge 800W device and WiFi), IP address, MAC address, last connected, policy and actions columns will provide insight and control over the LAN clients on this network.
From this page, access policies can be configured at a default level and per client. By default, the access policy is to ‘allow’ any LAN clients connecting (includes Wi-Fi clients on 800W deployments) - the default policy can be updated to ‘deny’ any LAN clients as well.
The “+ Add LAN client” button allows to manually add a LAN client via the MAC address, and can configure the Client name, Policy, and/or Static IP allocation.
Existing LAN clients can be modified via the Actions column and can configure the client name, IP address, set static IP, change security policy, view MAC address, and view last connection timestamp.
Comments
0 comments
Article is closed for comments.