Bigleaf Partner - Edge 800W Wi-Fi Configuration

Note: This documentation is intended for Bigleaf Partner Provisioning processes only.

The Edge 800W device from Bigleaf features built-in Wi-Fi capabilities, see Bigleaf Edge Router Datasheet for specifics. 

Currently, the Wi-Fi features below are only available if a site has an Edge 800W device AND NAT Firewall mode enabled.

Enabling Wi-Fi

• Navigate to a site that already has an Edge 800W device assigned and provisioned
• Click on the 'Site Configuration' tab from the 'Site Overview'. 
• Inside the Site Configuration, click on the 'General' tab
• Click toggle button to enable 'Wi-Fi service' -->
  
  

Wi-Fi Configuration Options

• Once enabled, Wi-Fi settings can be configured under the new 'Wi-Fi' tab
• Customers can toggle off/on individual 2.4GHz and 5GHz networks
• Customers can edit Wi-Fi network name (SSID)
• Customers can view/update Wi-Fi password
  • Bigleaf currently utilizes WPA2 security protocol for Wi-Fi passwords
• Customers can edit Wi-Fi channels in use for 2.4GHz and 5GHz networks
• Customers can enable/disable broadcast of SSID

Guest Wi-Fi Configuration Options

Below the Primary Wi-Fi network settings, there is a toggle button to enable a 'Guest Wi-Fi':

Devices connected to the 'Guest Wi-Fi' network will be segregated into a separate subnet and DHCP server.

• Once enabled, customers can toggle off/on individual 2.4GHz and 5GHz networks
• Customers can edit Guest Wi-Fi network name (SSID)
• Customers can view/update Guest Wi-Fi password
  • Bigleaf currently utilizes WPA2 security protocol for Wi-Fi passwords
• Customers can edit Wi-Fi channels in use for 2.4GHz and 5GHz networks
• Customers can enable/disable broadcast of SSID
• Customers can edit Guest Wi-Fi default gateway and subnet mask