LAN Clients

The LAN Clients section of the Site Configuration page, allows users to manage DHCP address assignments, security settings, client details, and configure port-forwarding options.

NOTE: In order to utilize these features, the site must be configured with an Edge 800W device and NAT Firewall mode enabled.

LAN Clients Table

This will provide a table of all clients that have connected to the Bigleaf LAN, whether connected via Wi-Fi or Ethernet.

• Client Name
  
  • • Name associated to client device
• Connection Status
  • • Online or Offline
• Connection Type
  • • Ethernet or Wi-Fi
• SSID
  • • The associated Wi-Fi network that was used by client to connect to network
• IP Address
  • • IP address assigned to client
• MAC Address
  
  • • Recorded MAC address of associated client
• Last Connected
  • • Last recorded connection time of client
• Policy
  • • Allow or Block client
• Actions
  • • Edit
      • • Update Client Name
        • Update IP Address
        • Assign IP Static IP Address
    • Delete
      • • Remove client record from LAN Clients table
          
          

ACL Default Policy

• Allow
  • • Allows all devices by default to connect to the Bigleaf device
    • Specific devices can be 'Blocked' via the 'Actions' in the LAN Clients table
• Block
  • • Blocks all devices by default from connecting to the Bigleaf device
    • Specific devices can be 'Allowed' via the 'Actions' in the LAN Clients table

Add LAN Client

• Client Name
  • • Name of device
    • Optional field
• MAC Address
  • • Hardware address of client
    • Required field
• Policy
  • • Default
    • Allow
    • Block
• Static IP
  • • Assign static IP assignment within DHCP address pool
    • Optional field

Port forwarding rules

Port forwarding rules allow specified network traffic to pass through the NAT Firewall and deliver traffic to clients on the LAN.

• Port forwarding rules are only configurable if the site is using a Bigleaf Edge 800W device and utilizing NAT Firewall. 
• LAN Client must have a static IP assignment.
• Port forwarding rules can not be assigned to devices connected to the Guest Wi-Fi network.

+New Rule

Add a new port forwarding rule with the following details:

• Description
• Protocol
  • • TCP
    • UDP
    • ALL
• External ports
  • • Single port, example '22'
    • Range, example '22-24'
• Internal IP Address
  • • LAN Client with static IP